In the process of using industrial chiller, various problems will inevitably arise. Due to the construction of the industrial chiller, once the compression ratio of the compressor is too high, the working efficiency of the industrial chiller will be affected, and the working efficiency of other components will be reduced due to various reasons, which may cause the refrigeration of the industrial chiller system. The efficiency is reduced or not cooled at all.
Industrial Chillers What are the impacts of too high a compression ratio?
The compression ratio of any type of chiller should not be excessive. Compression ratio is very easy to understand, is the degree of compression of the gas ratio, such as the previous gas is 10, after compression is 1, the compression ratio will be very high, it can be concluded that if the compression is relatively high, the value is larger, then It is certain that the work load of the compressor will be even greater.
Compression ratio is too high and the load of the compressor is most likely to increase. When the load is large, the work efficiency will decrease, and the consumption of electrical resources will increase. As the compression ratio of the compressor increases, the internal temperature will be higher, so it will not only affect the properties of the refrigerant, but also may cause the viscosity of the lubricant to decrease, the lubrication function to become lower, and the lubricant that can not play its due role in the compressor. This will increase the chance of compressor wear.
Industrial Chillers High Compression Ratio Solution

Check whether there is any blockage. It is recommended to replace the filter. Changing the filter can improve the filter filtration of the industrial chiller system. Impurities and the ability to freeze impurities that may be generated in the lubricating oil, thereby preventing clogging of piping and valves.

This article comes from industrial chiller manufacturers www.dgcarno.com.cn